Ask questions on STM32CubeMX. Discuss code generation and configuration challenges, among other topics.
We are pleased to announce that version 6.17.0 of STM32CubeMX is available. What is new in 6.17.0: Added support for new microcontrollers across the STM32WBA, STM32H5, and STM32U3 seriesAdded support for new boards: NUCLEO-WBA25CE1, NUCLEO-H5E5ZJ, ST...
We are using STM MCU MPN : STM32U375VGT6Q for one of our new projects, we are currently using HSE External 16 MHz crystal for system clock.We are trying to configure the STM32U375 MCU to run at 96 MHz using an HSE external 16 MHz crystal. In STM32Cub...
It seems like CubeMX sets this default value hspi1.Init.MasterKeepIOState = SPI_MASTER_KEEP_IO_STATE_DISABLE; when doing software NSS and SPI Mode 3 like: hspi1.Init.CLKPolarity = SPI_POLARITY_HIGH; hspi1.Init.CLKPhase = SPI_PHASE_2EDGE; hspi1.I...
Why can’t my cubemx configure L1 cache? How to enable it?Also, the MPU cannot be configured. You can only use the default configuration and modify it in the generate code.I also configured Memory management, but did not see the enable Cache and MPU s...
I need to learn more (detail) about STMCubeMX "extended mode" and small-pincount multi-bonded MCUs (this posting label specifies STM32C0 series which is what I'm currently working with.)STM32CubeMX UM1718 section 4.5.8 describes extended mode (I enc...
Hello allI am trying to integrate CMSIS-DSP in my CMake project. From CubeMX, I have the following options:and I see the following folder struct:and to include DSP folder in my project, I have done the following changes in my top level CMakeLists.txt...
My projects are all in C++ and were building completely fine. After I generated the code from CubeMX, the language switched back to C. I had to go and manually switch to C++, then it gave me build errors with linker script... Please fix!
Created a new project with v6.8 and reproduced the issueSteps: 1.cubeMX create new STM32F334 project and generate code.(Project-application structure-advancedProject-IDE-MDK-v5.32Code Generator- copy only the necessary library filesCode Generator- De...
The STM32N6 supports YCbCr as an input format (see reference manual RM0486 section 21.3.5). As of version 6.16.1, this option is still not available in STM32CubeMX. The generated code can be manually modified to make it work by settinghdma2d.LayerCfg...
I am starting use of UM3029 Rev 3 (STM32C0 HAL drivers) and trying ensure I use HAL_SYSCONFIG_SetPinBinding properly (important because the 6 usable IO pins are multiply bonded to device peripheral pads.)I am working with STM32C011J6 (SO8 package) an...
I'm working on a project with the STM32H503CBU7 which requires USB. I have a 32MHz external crystal on my board that appears to be stable. The chip works and can be programmed and such. I also troubleshot out other physical issues like cold joints an...
