Ask questions, find answers, and share insights on STM32 products and their technical features.
Posted on September 03, 2015 at 14:57I'm using flash memory in my project so in order the interrupts to work properly I have to move the ISR vector to SRAM or else the flash will stall the interrupts during its work. My working environment is CubeMX...
Posted on August 13, 2015 at 19:10 Hi, I am having trouble using an external pull up resistor to 5V. The voltage at the GPIOs is clamping to ~3.65V. Notes: Processor: STM32L151VBT6 (100-LQFP) Test Board: Proprietary ...
Posted on September 08, 2015 at 19:42Hi,I want to have precise ADC readings on stm32f4 for my project work but it always give me about 1% of error. For example if i take 0 V reading by grounding 12bit ADC it gives readings in between 0-15 (out of 40...
Posted on September 06, 2015 at 15:35Guys, How can I format my NAND flash chip to FAT32 ? Can I use USB-OTG ? Any examples or clues ? Thanks
Posted on September 10, 2015 at 10:41Im using the stm32f407vg discovery board, and coocox is my ide. Im trying to use Random number generator (RNG) to generate true random number. Please see code attached. When i run it, it get stuck in ''while(RNG...
Posted on September 08, 2015 at 14:59 Hi every one I want to establish a connection using CAN between two STM32F407 boards, my CAN configuration is working on same board, CAN1 to CAN2 is successful, But i am not able to send the same frame to di...
Posted on September 09, 2015 at 11:02Hi, I have read some of the previous related issues, but I am still confused. How do I use the uart interrupts in a correct way (using hal)? I need to receive each single character since don't know the length. I ...
Posted on September 10, 2015 at 08:03Can anyone tell me if a SPI driver exists to link with FATFs that supports SDHC/SDXC cards. i.e. greater than 4GB.The examples supplied in the STCube only seems to support SDSC <4GB.I see that clive1 has patched ...
Posted on February 14, 2013 at 06:16Hi All, I have copied a few different code examples from this forum for quadrature encoder but I just cant seem to get it to work. I have tried on TIM8, TIM3, TIM12 with no luck. The examples I have copied the cod...
Posted on September 07, 2015 at 17:18Hi. Create and modifi BUTTON I can. With functions BUTTON_Create, ... but how to delete it? BUTTON_Delete I found not. Can be used the function WM_DeleteWindow on the BUTTON? Or how to do it? Thenks JS
