Ask questions, find answers, and share insights on STM32 products and their technical features.
Hello everyone,I am working on my bachelor thesis about sensorless Field-Oriented Control (FOC) for a three-phase BLDC motor.At the moment, I have a NUCLEO-F303RE board, a small BLDC motor, an ESC, and a power supply. I have already generated and mea...
Hi everybody.I'm currently trying to use the N6 Nucleo for a personal application but am having trouble starting the debugger after initially successes. I am using the Nx_TCP_Echo_Server example, and after a couple of successful iterations my debugge...
Hello,I am working with the B-L4S5I-IOT-01A board (MCU: STM32L4S5VIT6) and attempting to load a .hex file using the UART bootloader via USART1 (PB6, PB7).Since this USART is connected by default to the ST-LINK interface, I removed the necessary resis...
Hello everyone,this is my first time building an STM32 Based Board myself.I am trying to talk to the Chip Using a CP2102 UART Bridge connected to PA9 & 10.For Reset and Boot 0 ive connected Reset (NRST) to RTS of the UART Bridge and Boot0 to its GPIO...
Hello, in an earlier post it was suggested to reset the FDCAN for full error recovery using RCC_APBRSTR1.FDCANRST Bit This bit seems to be global for all FDCAN instances. Is it correct that full error recovery in one FDCAN instance is not possible ...
Hello all, Split from this thread: I'm using an STM32U5G9 and I need to read files from a USB stick. I don't want to use ThreadX because I have to keep this application small. How can I achieve this if UsbX and FileX are supposed to be used only wi...
Can anyone explain this footer note in the electirical characteristics sheet for the STM32F777xx STM32F778AxSTM32F779xx. on page 110.2. 216 MHz maximum frequency for 6 suffix version (200 MHz maximum frequency for 7 suffix version). I am using the ST...
Hi all,I really hope someone can shed some light on this...I am trying to find any information regarding the accuracy of the internal temperature sensor of the STM32H7 family, more specifically the STM32H743XIH6.I understand that each device is facto...
Heyho,I recently started using ITCM SRAM in my H733 project, functions there working well.Then I thought that it might make sense to also copy the vector table and some interrupt handlers to ITCM.And this for the custom bootloader (BL) and the applic...
Hello,I am working on a design incorporating the STM32U3C5CIU6Q in SMPS mode. This package includes two VDD11 pins. I am having trouble interpreting the datasheet when it comes to the number of inductors I will need. This note under Figure 24 in the ...
