Resolved! NUCLEO-C5A3ZG STM32C5 QSPI Display Bring up Project
This project tests the STM32C5's XSPI capability to drive QSPI display using the NUCLEO-C5A3ZG M.2/SerialMem connector. GitHub - stm32-hotspot/STM32C5-M2-Serial-Mem-QSPI-Display · GitHub
STM32 MCUs Boards and hardware tools
Ask questions and find answers on STM32 hardware set-ups, including schematic-related challenges, debugging probes, power configurations, and more.
Forum Posts
STM32G071KBU6 unable to program with STLink V3-minie
While designing Electronic speed controllers for a 6s battery, an stm32 was decided to use as the MCU. After receiving our first PCBs, we were unable to successfully program them with the stlinkv3 minie. Attached is an image of the schematic of wh...
Resolved! handlandmarks pre built binarys uvc output does not work on the C02 revision NUCLEO-N657X0-Q
hi, ive noticed that hand landmarks pre built binarys uvc output does not work on the C02 revision NUCLEO-N657X0-Q but does work on the c01 rev, could anyone guide me on how to get this demo up and running ont he c02?
Resolved! Camera compatible to Nucleo F756ZG board (?)
Dear all, I would like to connect a camera to my Nucleo F756ZG board, with the goal to send images via the ethernet port. However, this board doesn't feature a 30-pin ZIF connector nor a 22‑pin FFC connector....Apparently, the STM32 F756ZG has a "DCM...
Resolved! STM32F469i-DISCO: Need help with LCD drivers
So as the title suggests, I have been trying to get the LCD screen to work on the STM32F469i-DISCO board. Currently I just want it to turn on at all. I found the BSP drivers in this link as well as the OTM8009A drivers in this other link When I run ...
LCD Feasibiliy in STM32F746 Discovery Board - STMicroelectronics Community
Dear Sir/Mam, As LCD, i.e., RK043FN48H-CT672B Rocktech of STM32F746 Discovery Board is obselete hence can we change to RK043FN66HS-CTG Rocktech without any implication in the firmware of Discovery board? Please respond me as soon as possible. Best Re...
STM32U5G9J-DK2 Demo on MB1860A MB1860B - differences and scheme for A versions
Moved from STM32 MCU products forum board to MCU embedded software as the main question is about how to run the demo vs LCD versions. I got STM32U5G9J-DK2 and this Discovery is still assembled with LCD board MB1860A version. But the documentation su...
STM32 USB Host HS not detecting USB
I have connected and an external HS PHY to STM32F427VGT6 through ULPI pins.Configured USB_OTG_HS in Host Only mode for external Phy with parameter Settings asSpeed: High Speed 480MBits/s Enable internal IP DMA: DisabledPhysical Interface: External Ph...
STM32 Schematic/PCB placement review
Im an engineering student and wanted to dive into PCB designs, so I started off with a PCB design for a vibration monitor system that i first built on arduino. This is my first ever PCB design which I made using reference/data sheets and whatever res...
Resolved! STM32N6570-D: Is XSPI/OSPI for memory only, or also external peripherals?
Does the STM32N6570-DK board support XSPI/OSPI interfaces for communication with external peripherals, or are these interfaces limited only to internal or external memory devices?For example, if there is a Device that supports OSPI/XSPI for communica...
Resolved! STM320U LPUART2 not working after waking up from the STOP0/ Sleep Mode.
Hello Everyone,I am currently using LPUART2 for communication between an MCU (STM32U031) and an MPU (Application Processor).Configuration parameters:Baud rate: 9600Stop bits: 1Parity: NoneData bits: 8Description:Data exchange between MCU and MPU work...
