Ask questions on STM32CubeProgrammer and find answers on device detection, connection failure, programming issues, and more.
We are pleased to announce that STM32CubeProgrammer 2.22 is available What is new in 2.22: Support for the STM32U3 microcontrollers with 2 Mbytes of flash memory: Internal memory programming through debug and bootloader interfacesOption bytes program...
Dear STM32CubeProgrammer Community, I hope you are all doing well. Over the past months, you may have received an email from me, either through the STM32CubeProgrammer survey or on other topics like CSAT or Raspberry Pi support. First, I would like...
Major change in SigningTool for STM32N6 in STM32CubeProgrammer v2.21.0 This release, we decided to change signing tool behavior to not automatically align the payload to 0x400 with padding bytes, since this is not necessary for other STM32 series. T...
Hi，There are four STM32 MCU on my board. I want to use one JTAG chain to cascade them. So, Could STM32CubeProgrammer software with J-link or ST-link simulator support JTAG Chain to program several STM32 MCU on the one Chain? Thanks in advance!Best re...
Hi everyone,I've a strange problem when I write to an external flash memory (S29GL512T) throught a STM32F767 MCU and a custom external loader loaded in the STM32CubeProgrammer.After debugging the external loader several times, I've found that the con...
Hello TeamThis is regarding, facing failure while doing mass erase operation for flash on the NUCLEO-U575ZIQ Evaluation Board. The goal was to do simple project led blinking based on freertos using TFM software base environment.The regression.sh scri...
Hoping someone could help. I did a full erase on the stm32h747i_disco from the stm32cube programmer. I attempted (several times) to upload the STM32Cube_Demo-STM32H747I-DISCO-V1.0.0_FULL.hex and got the following error:14:09:58 : Opening and parsin...
Hi, I have been trying to implement a logic to flash the updated firmware on top of existing with established DFU mode and using stm32cubeprogrammer. Where I chosen bin file for flashing and I provided the starting address as well. For confirming I h...
Hey,I'm trying to flash some boards, same as i've done thousands of times with this PC and ST-Link, but Cube Programmer does not load the FlashLoader properly. I'm not using a custom loader or anything, just the default loader for my STM32F051 boards...
Hi everyone,I try to connect to my NUCLEO board (NUCLEO-L476RG) via STM32CubeProgrammer but I receive the following error message:I reinstalled the STM32CubeProgrammer but nothing changed. I used to write my program to the MCU flash several times usi...
So originally, I was using a custom bootloader and painfully sending 32 bytes over custom HID to my device. It works, but it's really slow. Not related, but I just want you to know how dumb I am... Anyway, I followed the tutorial to use DFU USB inter...
Hi!I have a custom PCB with H7R3Z8T6 & MX25L12833F (16MB Marconix NOR-Flash) hooked up with XSPI1 (Quad SPI). I have been having a very difficult time programming the external memory with the External Loader in CubeIDE.I have followed a forum post (h...
I'm unable to run uninstaller.jar in the the uninstaller folder to uninstall STM32CubeProgrammer.
