Ask questions and find answers on STM32 microprocessors software development tools.
We are pleased to announce that the minor version 2.1.1 of STM32CubeIDE is available. What is new in 2.1.1: This release covers the topics listed below: SEGGER J-Link GDB server updated to 9.24 to fix an issue with the Live Expression view during the...
We are pleased to announce that version 6.17.0 of STM32CubeMX is available. What is new in 6.17.0: Added support for new microcontrollers across the STM32WBA, STM32H5, and STM32U3 seriesAdded support for new boards: NUCLEO-WBA25CE1, NUCLEO-H5E5ZJ, ST...
We are pleased to announce that STM32CubeProgrammer 2.22 is available What is new in 2.22: Support for the STM32U3 microcontrollers with 2 Mbytes of flash memory: Internal memory programming through debug and bootloader interfacesOption bytes program...
This post provides a workaround for a specific issue in STM32CubeIDE v2.0.0. The issue will be resolved in the next version. If STM32CubeIDE v2.0.0 is installed from scratch and if the imported project in STM32CubeIDE v2.0.0 is a project generated wi...
Dear ST Community, We are pleased to inform you that the issue regarding the OpenSTLinux plugin for STM32MP2x has been resolved. The plugin is now available and can be accessed via the update site. This update ensures that users can now proceed with...
Updated post to reflect permanent fix Dear STM32CubeIDE user, Further to the recent STM32CubeIDE project creation issue, we would like to inform you that a solution is now available for you. This permanent fix applies to all STM32CubeIDE versions. I...
Hi,We are using stm32mp157a-dk1 target.I have an issue i.e,when i use uboot source code dts file in u boot source code its works fine.when i replace original dts with stm32 cubemx generated dts it didn't works.Can i use cube mx generated dts in plac...
I am trying to Debug m4 in production mode. M4 is not halted.I am getting an error "Failed to insert breakpoint".I can successfully debug in Engineering mode. but, I need to Debug in Production mode.Can you explain how to solve this issue?
I've build all part (linux, tf-a, u-boot) in stm32cubeide, acording to my device tree configured in cube.I would like to ask if there is short way to create sd-card image from cube gui? If not, could any one share way how to do that from build to rea...
Hey , In the OTG block diagram (attached below ) pin PA11 and PA12 can be configured as OTG_FS but using CubeMx we can't set the functionality of these pins.
i'm tyring to compile a single C++ file using by right clicking on the file and selecting the 'Build Selected File(s)' option from the pop up menu. when i sue this option i get the following error:7:32:19 **** Building Selected Files of configurat...
hi,i'm trying to compile a program in STM32CubeIDE that i wrote that cotnains calls located in libgpiod. but i'm getting linker errors as shown below. do i need to create the library myself or do i need to set a path in the CubeIDE's environment?i...
My problem is, that on the one hand, the SPI3 configuration is lost after I close CubeMX. The assignment is lost to the M4 core (changed from A7 to M4 and after reopening, its again at A7. The changes have been saved and tried on different machines)....
helloI am using a STM32M15 into a custom boardi am trying to use STMBoard to burn my systemthis is the .tsv that i am using#Opt Id Name Type IP Offset Binary- 0x01 fsbl1-boot Binary none 0x0 tf-a-stm32mp157c-ya157c-512d-...
Hi there! I just purchased an STM32MP157D-DK1 discovery board, and noticed that in STM32CubeIDE there are no definition files for this model, only a subset of the other MP1 discovery boards (but curiously not all of them). Is this product unsuppo...
i followed the setup procedure described in the youtube video https://www.youtube.com/watch?v=qEzfqKt3exE.i checked the path that is displayed in the error message and it does exist. the file the debug session is trying to write to is the name of th...
