Resolved! NUCLEO-C5A3ZG STM32C5 QSPI Display Bring up Project
This project tests the STM32C5's XSPI capability to drive QSPI display using the NUCLEO-C5A3ZG M.2/SerialMem connector. GitHub - stm32-hotspot/STM32C5-M2-Serial-Mem-QSPI-Display · GitHub
STM32 MCUs Boards and hardware tools
Ask questions and find answers on STM32 hardware set-ups, including schematic-related challenges, debugging probes, power configurations, and more.
Forum Posts
STM32F072V8T6
Hi, I am MURALI SELVAM, I need a Reference design for STM32F072V8T6, Anyone who has a reference design, Kindly tell me, Thank you.
Resolved! Help Needed: Nucleo F401RE Board Issue with Shorted Analog Pin and Overheating
I'm using the Nucleo F401RE board, and I was successfully reading analog signals from a 4-20mA signal generator for a project. I achieved this by connecting a 150-ohm resistor in series. However, the system suddenly stopped working, and upon investig...
Building modified bootloader of stm32h750B board
When a new project is being created using Touch GFX, the project folder contains a sub-folder ExtMeM_Boot. This folder contains the source files and includes of the bootloader and its dependencies. A pre-built binary is also included (bootloader.bin)...
STM32H747I-DISCO - inconsistency in Product overview > All features and physical board
I'm a newcomer to the STM32 and looking at the various DISCO boards for an audio application (simple test rig for analogue and SPDIF fault finding).Looking at the STM32H747I-DISCO product description web pages and I see that the product overview 'All...
USB host application based on the Audio IN class
Hello,I've seen other posts provide links to examples for "USB host application based on the Audio OUT class". Are there any for audio in?Thanks
Could not flash to The B-L475E-IOT01A Discovery kit for IoT node
Hello Forum, As I am newbie to this forum I might have posted this question to wrong place, if so please guide me to correct place, Thanks in advance.recently I started to learn ARM Cortex M microcontroller. I bought B-L475E-IOT01A Discovery kit for ...
STM32F746GDISCOVERY code example for DCMI
Does anyone know where to find a code example for using DCMI on STM32F746G-DISCO? AN5020 says there are 5 examples based on STMCubeMX (section 8.3 p53). But, I can't find any examples for this when I try using STMCubeMX. It doesn't matter which SELE...
Resolved! Nucleo-H755ZI-Q How can I resolve ST-Link "No device found on target" error?
I have made a simple program flashing LED's from both cores and sending data between the two cores using a struct that resided on the same memory space for both.I used latest STM32CubeMX (Version: 6.9.2), STM32CubeIDE (Version: 1.14.1), and latest ST...
Build Ethernet function with Eval Kit NUCLEO-H723ZG
Dear Team, I am trying build Ethernet function with Eval Kit NUCLEO-H723ZG with STM32H723ZG MCU. However, Mostly is okay but i cannot ping to IP address set in Init. Could you check and recommend. Brgs, Thinh
Motor brake
Hi,I have STM32f407G-DISC1 board. My problem is, when i give the power my micro controller with usb(with pc) than i can go in main less than 1 sec. but when i give the power from 5V pin than it takes more than 2 sec. How can i make this time shorter.
