Ask questions on STM32CubeMX. Discuss code generation and configuration challenges, among other topics.
We are pleased to announce that version 6.17.0 of STM32CubeMX is available. What is new in 6.17.0: Added support for new microcontrollers across the STM32WBA, STM32H5, and STM32U3 seriesAdded support for new boards: NUCLEO-WBA25CE1, NUCLEO-H5E5ZJ, ST...
I'm attempting to add a USB connector to my project, but my MCU lacks a "VBUS_SENSING" pin like another MCU I've been experimenting on has. Is there a way to simulate this pin? I'm using the MCU as a self-powered deviceMCU: STM32L052K6U6 (UFQHPN32)Pr...
I've noticed that when I enter the specific development board model, say for instance Nucleo-32 STM32G431 in my case, if I switch to HSE, the crystal is always set to 8Mhz, even if the crystal on the board isn't (i.e. it's 24Mhz in this case).It woul...
Hello to all, I am having problems with the CDC USB Device application. Does some one have a working USB example for STM32L1? . I am using latest version of CubeMx and STM32L1 firmware v1.9.0. The problem is that PC does not recognize the USB Device ...
I´m unable to generate the code for the CMSIS core of the STM32F407 Discovery kit.I have configured correctly everything (as shown in image 1, the other configuration tabs haven´t been modified from default ) but it gets stucked (image 4) in the bar ...
So I wanted to use a single DMA with the Dual regular simultaneous ADC mode on a NUCLEO-L476RG. However I noticed that just the master ADC value was present in the buffer of the DMA, even though the Data width of the DMA is set to Word.After some inv...
there is a strange issue when generate a code. The code generation cannot be ended with an error - "But EWARM V8project generation have a problem. before the code can be generated without an errors. After run generated code, always be hang at SystemC...
This is a test, but for this 01.2.3 Prerequisite - STM32Cube MX HAL MOOC , it's not a video and I'm stuck at 1% ... It should be 100%, if open no ? I put a screenshot here :
