Ask questions on STM32CubeMX. Discuss code generation and configuration challenges, among other topics.
We are pleased to announce that version 6.17.0 of STM32CubeMX is available. What is new in 6.17.0: Added support for new microcontrollers across the STM32WBA, STM32H5, and STM32U3 seriesAdded support for new boards: NUCLEO-WBA25CE1, NUCLEO-H5E5ZJ, ST...
Hi everyone, we are using stm32f405rgt6 microcontroller in our robot, when we are using i2c for reading data from BNO055 module suddenly the device get out of the i2c line or maybe can not read the data,Here are some more details:we pulled up our i2c...
I've just upgraded to MX6.8.0 and IDE1.12.0. I get this notice when loading a new application or example program. It doesn't affect anything and choosing OK let's everything proceed, but I'd like to get rid of the notice and find out where it's get...
Hello,i have custom board with STM32F779 and custom Ethernet PHY KSZ8061RNB.I'm using CubeMX and only 2 PHYS are supported. I haven't found any documentation how to do configuration with custom PHY device. I have found CMSIS driver for KSZ8061RNB, b...
I am reaching out to seek your expertise regarding a clock setup issue that I encountered while using the STM32H743 microcontroller.My goal is to use up to a maximum of 480MHz system clock using a 25MHz HSE. However, I have encountered some errors in...
We are working on porting an existing STM32F373 USB application to STM32G431 using STM32CubeMX and the USB Device Middleware. The USB device is a composite device of two custom interfaces.The first interface is a multitouch interface with 1 endpoint,...
In the HAL Library for the STM32H7 familiy (version 1.11.0) downloaded with STMCubeMx there is the following entry in the stm32h7xx_hal_rcc.h file:#if defined(RCC_RSR_CPURSTF) // <<---- This is the line in question #define RCC_FLAG_CPURST ...
I want to add a TIM15_TRIG connection (is this the same as TRGO?) to a DMA transfer request.When trying to do this via STM32CubeIDE "Version: 1.11.2 Build: 14494_20230119_0724 (UTC)" I get the following options:i.e. no option to select TIM15_TRIG, wh...
Cube IDE 1.12.0 Build 14980_2023_03_01_1550OS: Windows 11 Pro 22H2 Build 22621.1413Project using STM32L476 Nucleo board; low level only (no HAL used at all)I've build my project IOC file using the previous version of Cube. When I open it, I have 3 op...
Hi!My question may seem stupid but I am stuck with it. I made a register based project which is working pretty good. I want to add to my project usb cdc. I generated a code using CubeMX but it generates plenty of drivers and files (including the cloc...
