Ask questions, find answers, and share insights on STM32 products and their technical features.
Posted on August 20, 2012 at 12:04I have just bought a Core407V STM32F407VET6 STM32 ARM Cortex-M4 Development BoardI want to use it to send data from my pc to the STM32 around 2048bytes 60 times a second.Im a bit confused what type of USB library i ...
Posted on September 10, 2012 at 18:49Dear STM-experts,i wanted to use the FPU of my STM32F4 (Cortex-M4). To see if it's working properly i compared with this page:http://www.micromouseonline.com/2011/10/26/stm32f4-the-first-taste-of-speed/?doing_wp_...
Posted on September 06, 2012 at 23:45Dear colleagues, I'm presently looking at the ADC routines in the Standard Peripheral Libraries, and they're pretty well written and documented; what I'm failing to understand so far is how the GPIO pins...
Posted on September 11, 2012 at 22:33Hi I would like to run a STM32L151 (M3) with low core clock (to reduce current comsumption) and with high peripheral speed (say 16MHz PWM clock). A possible solution (HSI internal clock for ADC is routed to the M...
Posted on September 10, 2012 at 11:52Hi all,Coming from AVR 8 bits architecture, I plan to work (hard) to develop an IMU under STM32F405xx now.I'd like to know if the following architecture is correct. I believe it's possible from my first readings ...
Posted on September 09, 2012 at 16:31 I found the following bug. I have a 16MHz crystal on my board design. I use the STM32F103RB uC with Atollic True Studio Lite 3.2. The stm32f10x.h advises me to set theHSE_VALUE according to my crys...
Posted on September 05, 2012 at 15:58Hello, I just started a new project with the F103RE controller. Opposed to the F103RB I have used before, the ISP bootloader in this chip simply does not work. Though it is obviously running correctly (verified b...
Posted on September 10, 2012 at 12:26A fairly basic thing to do which I am struggling to find any precise examples for.I want to be able to setup a Comms timeout - specifically on an SPI connection whereby if I don't get a response to a command I s...
Posted on May 26, 2012 at 17:08hi all i try to work with usb host hs for msc. but no answer ! my program in this instruction looped : do { status = USBH_MSC_Read10(&USB_OTG_Core, buff, sector, 512*count); USBH_MSC_HandleBOTXfer(&...
Posted on September 10, 2012 at 09:25In my application I set up SysTick with: SysTick_Config(SystemCoreClock / 1000);to generate a 1ms interrupt.I got some weird timing anomalies and eventually used a timer interrupt to generate 1ms interrupts using...
We’re moving the ST Community to a new platform to give you a better and more reliable community experience.
