Resolved! NUCLEO-C5A3ZG STM32C5 QSPI Display Bring up Project
This project tests the STM32C5's XSPI capability to drive QSPI display using the NUCLEO-C5A3ZG M.2/SerialMem connector. GitHub - stm32-hotspot/STM32C5-M2-Serial-Mem-QSPI-Display · GitHub
STM32 MCUs Boards and hardware tools
Ask questions and find answers on STM32 hardware set-ups, including schematic-related challenges, debugging probes, power configurations, and more.
Forum Posts
UART_HyperTerminal_IT Example on STM32N6570-DK Board - Debugger can't connect
I built and debugged the default example UART_HyperTerminal_IT using the STM32N6570-DK board, but the following error occurred. How can I resolve this issue? I am using the latest versions of ST-Link and all related software.STMicroelectronics ST-LIN...
Resolved! STM32h755 Clock sync
Hi,I am working on a product for one of my clients that included two MCUs (STM32h755) on the same board working together and he requested both MCUs to be run on the same time "same clock", to be synced together. could you please advise if it possible...
STLINK not detected by the computer; not shown in device manager
Edit by ST Moderator: This post has been translated from Chinese to comply with the ST Community Terms and Conditions (§10.2).Why the computer can't detect the STLINK interface or the device manager doesn't show the unknown device after plugging in t...
Nucleo-144 F767ZI board just randomly stopped generating any PWM signals
Yesterday I tried to generate a 1 MHz PWM signal, everything is set up correctly, I have a soldered wire on my PA0 pin, and it used to work like yesterday, it generated a pretty decent signal, global interrupt is on, parameter settings are set as wel...
One USB port for both ST-Link and user device applications
Hello ST community,I am trying to create a USB connection between my NUCLEO-STM32F303RE board and my computer. The datasheet indicates that configuring the USB port for this user device purpose is possible. However, when I received the board, I reali...
Connect the Nucleo IHM02A1 to a STM32F429ZI-disco board
Hey, I am new posting to this forum!I am planning to utilize the above mentioned boards in combination in order to accomplish a tiny, hand-held appliance controlling a stepper motor, carrying out measurements at positions and storing the data to a US...
Resolved! Nucleo-f446re internal dac
/* USER CODE BEGIN Header */ /** ******************************************************************************* * @file : main.c * @brief : Main program body ************************************************************...
Resolved! How to detect the RESET button on STM32L552E-EV
Hello,I have a STM32L552E-EV, and I would like to know how to detect the RESET button ?Thank you for your helps.
Current error measurement on nucleo U031
Hello all, I made a custom board with a STM32U031 and measure the standby and standby+RTC current. The value was very high (µA), so I tried with 2 nucleo board, U031 and U083 with the PWR selection exemple code from ST. And I also check this video w...
Resolved! Best STM32 Development Kit for Learning FreeRTOS with Peripherals
Hi everyone,I’m planning to buy an STM32 development board to start learning FreeRTOS. I have experience with bare-metal firmware development, primarily on TI C2000 DSPs and PIC32 MCUs, but I have no prior experience with STM32.My goal is to first le...
