Ask questions and find answers on connectivity ICs, focusing on protocols and I2C challenges on STM32 Nucleo boards and BlueNRG products.
Posted on July 13, 2017 at 12:06Hello all,I am new using the bluenrg-1, I would like to create an application to download into the ble module but not really sure from where to start, how to do it.I have done some test communicating with the ble usin...
Posted on April 15, 2014 at 10:42I'm using STMIPID02(MIPI/CSI-2 desrializer)I have initialized regieter of STMIPID02 by I2C. but, It output no signal on parallel interface(Pixel interface)help me... anyone have more data for initialize of STMIPID0...
Posted on July 18, 2017 at 16:44Hello,Pretty new to this tiny jewel, I have trouble understanding how everything is architectured.When reading the ``datasheet'' (DocID028866 Rev 3), it seems [see fig.1] that the Cortex-M0 core is connected through a...
Posted on July 18, 2017 at 13:59i'm working on a BLUENRG_CSP device and i've retained the ble section similar to the Sensor Tile STLCS01V1,my BLE is initializing but not advertising.i'm able to read the device ID,only difference i can see with respe...
Posted on July 13, 2017 at 23:05I need to adjust the Advertising Intervals (min/max) associated with the ''Bluehci_Gap_Set_Limited_Discoverable'' command which is described on pages 30-31 of the UM1755 BlueNRG Bluetooth LE stack ACI User Manual (lin...
Posted on July 17, 2017 at 19:04Hi all,Following the schematics for the http://www.st.com/content/st_com/en/products/ecosystems/stm32-open-development-environment/stm32-nucleo-expansion-boards/stm32-ode-connect-hw/x-nucleo-idw01m1.html and the schem...
Posted on July 17, 2017 at 13:26Hi, I'm trying to use the SPWF01SA module (IDW01M1 expansion board) like an HTTP server to send some POST response to an iPhone app. Now I'm able to open a TCP Server on the 80 port, shutting down the HTTPD server. Bu...
Posted on July 12, 2017 at 09:32We are using the SPWF04 SPI and have the following issues1) No Ack after TCP socket data packet sent:I can setup a client socket or a server socket and start streaming data but at some point the SPWF04S does not ack a...
Posted on July 09, 2017 at 09:36Hi, I've got problem with SPBTLE-RF module while it's in CENTRAL role and it's scanning devices. I'm able to start scanning procedure and receiving advertising report but it's not completed. There is no all informatio...
Posted on July 07, 2017 at 11:31Hi,I purchased the S2-LP development kit which contains 2 boards:- NUCLEO board equipped with STM32L152RE- S2-LP boardThe development kit contains though the project files for STM32L053R8Are available the project file...
