Ask questions and find answers on STM32 microprocessors, including hardware, power, DRAM, flashing, interfacing, device tree, and peripherals.
Hi I am trying to attach gdb using openocd to debug linux kernel, I am able to attach openocd.but when I start with gdb scripts https://github.com/STMicroelectronics/wiki-stm32mp-addons/blob/main/gdb-scripts/Path_env.pyGdb is not able to get symbols,...
Hello, I'm investigating DDR routing and for practice training to make 6 layer board with STM32MP135 and DDR - NT5CC256M16ER-EK, the similar to STM32MP135F-DK. Into the "DDR memory routing guidelines for STM32MP13x" everywhere recommend to use ...
Moved from a previous thread. @mƎALLEmunfortunately appear next problem .CAN works grate !The display connected by MIPI DSI it goes wrong when a lot of frames in CAN interface arrive. Like the display slowed down a lot ... @xchenreading this thread ,...
openstLinux version: 1. en.SOURCES-stm32mp1-openstlinux-6.6-yocto-scarthgap-mpu-v24.11.062. en.SDK-x86_64-stm32mp1-openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06command: $ cd tf-a-stm32mp-v2.10.5-stm32mp-r1 $ export FIP_DEPLOYDIR_ROOT=$PWD/../../FIP_a...
Hello,I am trying to setup CANbus on the STM32MP157f-dk2 board, but I am unable to get any CAN interface to appear. I have installed the STM32MP1 OpenSTLinux Developer-Package onto the board, and I am using an SN65HVD230 transceiver.First I tried ena...
I'm using minimal device tree files to get a custom (MYIR MYC-YF135) board to boot. At the moment I'm stuck when OP-TEE should give the control to u-boot. The boot stops on error message: No serial driver found .... F/TC:0 0 _regulator_enable:150 v...
i am developing custom board using STM32MP157FAC1.Please review the schematic of the custom board and verify the connections.
HiI'm new to embedded software development and STM32 too.I'm just wanna learn and explore everything about the STM32 MPU. I have STM32MP157A-DK1 board with me. So i planned to do this one as first.I want to make a custom u-boot compilation for the ST...
Hi,Does STM32MP235A has ONVIF compatibility when used in camera applications?Thanks,Preethi
Hi everyone! I'm here with my devkit and trying to have FDCAN working properly! I compiled the Yocto distribution for the board and I followed all the tutorials in the wiki ( https://wiki.st.com/stm32mpu/wiki/Category:CAN ) and here's what I came up ...
