Ask questions and find answers on STM32 microprocessors, including hardware, power, DRAM, flashing, interfacing, device tree, and peripherals.
Hi,I'm developping an application where we want the cortex-M doing some power management (with OpenAMP) and the cortex-A taking picture and saving it on SD card.I have the STM32MP157A-EV1.I used the OpenAMP_TTY_echo_wakeup sample that I modified for ...
Hi!I use STM32MP151 chip. Use Linux OS. Two master clocks(MCLK) clk_x8(for 48000) and clk_x11(for 44100) connected to I2S_CKIN throw switch. GPIO select it. Can I configure SAI driver and device tree for this situation?
I have an STM32MP157F-DK2 board. I want to be able to build my own image from scratch and I keep hitting knowledge gaps in the how-to guides on the st wiki page. I have tried to follow multiple guides including this one: https://wiki.st.com/stm32mpu...
Hi,Is there any example application code for STM32MP1 to keep A7 in deep sleep mode while keeping M4 in always run mode?Regards,Ram
Hi,we are currently testing our FDCAN on our STM32MP157F Device. We get some Messages that there ist an access violation. We see that is caused by the M_RAF interrupt. Are there any hints to get rid off these messages and errors? We tried different s...
I have been looking for step by step guidance on how to create a linux application for STM32MP157C-DK2, but I end up being unsecssuful all the time. The only help I seem to get is to import an existing project, which does not help me. I want my appl...
Hello Community Hope, all are doing well I'm dealing with the BSP development with STM32MP157a-dk1 board (as my intent is the design the bsp for my own custom board )For the instance, I'm intended to go from top to bottom of the Flash layout for the ...
systemd-analyze blame: 6.297s dev-mmcblk1p3.device 3.711s user@0.service 3.668s systemd-udev-trigger.service 729ms console-kit-log-system-start.service 663ms weston.service 598ms systemd-logind.service 516ms pxl-in...
How to debug what's behind a system reset because of watchdog? I tried using dynamic debug and add stm32_iwdg.c file to print debug output, but that didn't give me more info, just some pings. So what can be reason for watchdog reset? We have program ...
I found no STM boards on OSADL platform (www.osadl.org). Why ?
