Ask questions and find answers on STM32Cube packages, including HAL, LL and middleware, and expansion software.
Dear STM32 Community, We believe that the example projects provided for the STM32Cube embedded software are a valuable resource when developing projects. We would like to better understand how developers use these examples in their workflow and e...
I am using a nucleo-wl55jc1 and I've attempted to setup the example from this tutorial: https://youtu.be/OPrcpbKNSjU?si=mj6qIDGve6GwYWs6However, when I set the timebase source to anything other than SysTick to avoid the warning produced by the cubeID...
Hello,The following code compiles, but doesn't give the me results I'm expecting: void syslog2(uint8_t pri, const char *fmt, ...) { va_list args; va_start(args, fmt); printf(fmt, args); va_end(args); } main() { printf("%s\r\n", _tx_version_id)...
Hello,there is a race condition in the function SD_read() in the template file used by CubeMX when using FATFS with DMA template (sd_diskio_dma_template_bspv1.c).if(BSP_SD_ReadBlocks_DMA((uint32_t*)buff, (uint32_t) (secto...
Open On-Chip Debugger 0.12.0-00024-gc3ff39f8b (2023-06-26-16:51) [https://github.com/STMicroelectronics/OpenOCD]Licensed under GNU GPL v2For bug reports, readhttp://openocd.org/doc/doxygen/bugs.htmlInfo : Listening on port 6666 for tcl connectionsIn...
Hello ST team,I am experiencing an issue when trying to access the bootloader via UART on the STM32G070CBT6 and STM32L4R5ZI microcontrollers. When I set BOOT0 = 1, the bootloader works correctly via DFU (USB), but no response is received from the UAR...
Hi everyone,I’m currently working on an STM32F767ZI Nucleo board and trying to configure the Ethernet middleware. I’m new to STM32 Ethernet and LWIP, so I’d appreciate some guidance.Here’s what I’m looking for help with:Ethernet Middleware Configurat...
I am using stm32h743zitx nucleo board and thermal camera ,but in nucleo board stm32h743zitx internal temperature came 32 to 35 degree but same code i am using thermal camera than stm32h743zitx internal temperature came 123 and going above degree why ...
I AM USING A STM32H743ZIT6 CONTROLLER IN THERMAL CAMERA BUT I READ A INTERNAL TEMPERATURE 138 CELCIUS BUT IN NUCLEO BOARD INTERNAL TEMPERATURE CAME 35 TO 40 CELCIUS (I AM USING 400 MHZ BOTH NUCLEO BOARD AND THERMAL CAMERA) SO WHY IT CAME IN THERMAL ...
Hello,Why is there a limitation to the maximum Disk space in FileX? 256K is too small. I would like to allocate 64Mbytes.
STM32F405 I'm trying to use this model, but the IDE I'm using doesn't have it, so I'm trying to download it, but I'm not sure exactly where to download it or what files to download. I need to download a driver, but I don't know which file and which p...
