Resolved! NUCLEO-C5A3ZG STM32C5 QSPI Display Bring up Project
This project tests the STM32C5's XSPI capability to drive QSPI display using the NUCLEO-C5A3ZG M.2/SerialMem connector. GitHub - stm32-hotspot/STM32C5-M2-Serial-Mem-QSPI-Display · GitHub
STM32 MCUs Boards and hardware tools
Ask questions and find answers on STM32 hardware set-ups, including schematic-related challenges, debugging probes, power configurations, and more.
Forum Posts
Convert ST-LINK/V3-MINI to ST-LINK/V3-MODS possible?
As the MINI and MODS variants of the ST-LINK/V3 share the same board, I was hoping to be able to use the BRIDGE interfaces on the MINI.This seems to be impossible. My second idea was to convert a MINI to a MODS by desoldering all the components that ...
ST-LINK/V3-MODS UART access through API possible?
The ST-LINK/V3-MODS product pages list UART under the supported BRIDGE modes. The API pages do not implement any access to the UART interface. I know that VCP is an option, but unified access through the API is a large benefit when controlling multip...
Resolved! Where to buy a STLinkV3 MODS board ?
I designed a pcb adapter for this board in order to use it with my V2 based project, I’ll received soon this pcb from JLCPCB but I find no way to buy a board :ST website distributor stock informations are wrong, Digikey as 0 in stockFarnell has’nt go...
Resolved! How to make a Nucleo Board visible via USB?
I want to flash my Nucleo Board from STM32CubeIDE. When I click debug in the IDE it fails with:ST-Link enumeration failed Error in initializing ST-LINK device. Reason: ST-LINK DLL error.st-info --probe saysFound 0 stlink programmersWhen I enumerate...
STM32G071RB unable to make it work
Hi all,I'm trying to program this new G071RB, is the 3th device that I'm not able to make it work.. In simple word with the virgin device I can see it via Jlink and also I can program it (I've used CubeMX to make simple configuration of pin and progr...
Cannot get program to stop execution at breakpoint using ST-LINK V3 -or- Segger JLINK+.
I insert a breakpoint in the source code by toggling it Ctrl+Shift+B. I view the breakpoint in the Breakpoints window. After startup, the program is halted at the first line of code. I then press F8 to start the program and execution blows through th...
