Resolved! NUCLEO-C5A3ZG STM32C5 QSPI Display Bring up Project
This project tests the STM32C5's XSPI capability to drive QSPI display using the NUCLEO-C5A3ZG M.2/SerialMem connector. GitHub - stm32-hotspot/STM32C5-M2-Serial-Mem-QSPI-Display · GitHub
STM32 MCUs Boards and hardware tools
Ask questions and find answers on STM32 hardware set-ups, including schematic-related challenges, debugging probes, power configurations, and more.
Forum Posts
Resolved! Multiple MCUs are connected via JTAG using a typical JTAG daisy chain connection. All MCUs are already programmed with a FW that uses the JTAG pins for other purposes. Is that still possible to use the JTAG daisy connection to program all MCU at once ?
Hi all,The MCU we will be using is in the STM32U5 Family.The debug probe will be the SEGGER J-Link Base.Best regards,Bastien
Resolved! How GPIO speed is implemented on hardware lvl
Hello! I need to know how GPIO speed control is implemented. Unfortunately, no information was found in the documentation. All that is known is that the signal front is growing faster or slower, but why? I need some hardware schematic or diagram etc....
SWD DEBUG Communication STM32H7 ISSUE
Hi everybody,I'm facing to a strange issue linked to debug using SWD interface with my STLINK V3 for my µC STM32H7. I can download firmware .bin using TeraTerm (using UART RS232).However I'm unable to communicate using STM32Cube IDE in debug mode or ...
is LCSC dot com a reliable supplier?
Today, i just noticed LCSC (a supplier for JLCPCB) has some STM32G030 and they are way cheaper than in mouser i bought100+ for US$0.7436I bought 100 of them in price of 1.19$, but this price is way lower than ST eStore itself.Just.. how? Is it a reli...
ST-LINK USB driver available for Windows 11 on x64 computer?
I have installed W10 x32 version (the latest version 2.0.2 STSW-LINK009)
Which is the shelf life of MCU STM32F303CBT6?
I would like to know how long can the MCU sit on my warehouse before being assembled in the PCB
Resolved! STM32CubeIDE, STM32U5 : unable to launch the debugger (gdbserver)
Impossible to launch the debugger with the following configuration:STM32CubeIde1.7.0Target Nucleo-U575ZI-QST-link : Version: V3J8M3Build: Apr 9 2021 20:49:40See log filesSTm32cubeProg 2.8.1 can connect to the board successfully.What is wrong ?BUG ?
Fx_NAND_Write_Read_File example for the STM32H743I-EVAL board.
Hi,I loaded the example Fx_NAND_Write_Read in a STM32H743I-EVAL and the example didn't work. So I noted that my STM32H743I-EVAL (MB1246 rev. B) has a NOR flash (MT28EW128ABA1LPC-0SIT) instead of the MT29F2G16ABAEAWP NAND flash from the example. Where...
