Discuss power management solutions. Ask questions and find answers on voltage configurations, short circuit protection, and programming.
Your products have been instrumental in helping us achieve remarkable advancements, and we truly appreciate the quality and support you provide. I am currently developing VHF PA circuit that incorporates your product, the LDFPVR . To validate the de...
Kindly suggest 1-2-1 replacement for STW40NF20
Hi, We are working on LLC converter Vout=12V; Pout=100W. We are using SRK2000A IC at the output. We are facing some issues related to it. The IC behaves as expected while driving the load from 30% to 100%. But when we start reducing the load below 3...
Several production-active STM products reference application note AN1965, e.g. referenced in STA540's datasheet ( https://www.st.com/en/audio-ics/sta540.html ). This application note seems to be about heatsink considerations. Application note AN1965 ...
Dear ST Support Team, We are using the L9678P in an automotive design where the battery voltage is nominally 28 V. From the datasheet, we understand the following for the VBATMON pin: Absolute maximum voltage: 40 V Operative maximum voltage: 18 V We ...
Hi ST staff,I need your help.Our custoemr needs to get the latest version of "Rohs statment" with signature as attahced.Could you pleased to share for it, moreover, thanks to upload on your website in near futurelike as Onsemi or Nexperia do so?
Hey everyone,I am currently working on adding the STEF01 eFuse to my design and I have run into a roadblock. For starters, I can't seem to get the eval board to function. I have added the resistors to the board and I have a load on the output side bu...
Hi, Could you please provide the details of mentioned part COO & EOL Status? PN: STPS0560Z Thanks/Arunkumar
I am looking if there are any usage and layout examples for the STWLC38JRM as a 15W receiver. Thank you so much!
Hello everyone I'm working on a student project with an STM35H563RIT6 and a Power over Ethernet (PoE) supply. I'm currently validating my design, but, reading the datasheet of the PM8805TR to do PoE, I just see the output current (max 2A) but no v...
