Resolved! Part Marking for M24C08-RDW6TP
Hi, I am trying to find the Part Marking for M24C08-RDW6TP.Is there any datasheet for it? I already reviewed the datasheet but there is no any note for it. Thanks in advance.
Others: hardware and software
Discuss hardware and software design challenges, including NOR flash storage, OTA updates, component ID, and thermal management.
Forum Posts
LwM2M (Light Weight Machine to Machine) architecture vs Web socket + HTTP architecture
Hello everyone, I am aiming to build a desktop application for configuring and monitoring IoT devices (e.g., routers, switches, ciphers, sensors, etc.). To achieve this, I am considering two architectural approaches:First Architecture:The desktop app...
Addressable LED Programming in STM8
We are trying to program addressable LEDs through STM8 microcontroller. For the initial development, we use the NUCLEO-8S208RB. The architecture is as below image. Eight "IN-PI33QBTPRPGPBPW-60" LEDs connected to a data line in daisy chain.We face som...
Resolved! RTC Output on C13 Not Working (Bluepill STM32F103C8T6)
Hello everyone,I'm trying to get an RTC output on pin C13 using a Bluepill STM32F103C8T6, but it's not working.I have connected LED to PC13 to see the LED blinks every 512hz but its on all the time.Can someone help me.
STSAFE-A110, Key Establish and Wrap/Unwrap example doesn't work
Hi,I have issue on Key Establish and Wrap/Unwrap example.I have X-NUCLEO-SAFEA1 and NUCLEO-L476RG for testing.I downloaded X-CUBE-SAFEA1 from ST web site, version is V1.2.2. Here's what I tried.I ran paring example. I commented out "_FORCE_DEFAULT_FL...
RF-Flasher Launcher(CLI version of RF-Flasher GUI)
For some reason, I am not being able to set the frequency in the launcher but can change it successfully in gui.I am getting this invalid choice error:But I dont see any error in the argument:
Canbus Driver Init
Hello,I am new for the this mcu(STM8S). I want to init and run the Can driver. But I can't find any documentation or examples on the subject. I don't see any guidance on installing the driver. How should I do this? Are there any examples? I could onl...
How to reset Emulated EEPROM (in MCU Flash) when new code is uploaded?
Title edited to make clear that this is emulated EEPROM - in the MCU's Flash.How to reset the EEPROM every time a new code is uploaded?Is this possible? Thank you very much.
appropriate protocol for desktop application for configuring and monitoring IoT devices?
Hello everyone,I’m an intern software engineer currently developing a Qt-based desktop application for configuring and monitoring IoT devices running Zephyr OS.At the moment, I’m researching which protocol would be best suited for this purpose. I ini...
