Discuss hardware and software design challenges, including NOR flash storage, OTA updates, component ID, and thermal management.
The ST1S06xx datasheet (https://www.st.com/resource/en/datasheet/st1s06.pdf) contains an error: Figure 10 "Input voltave vs output voltage" has the axes labels swapped:A correct version of the Input voltage vs output voltage characteristic can be fou...
Is Cosmic license delivery service still working ?I submit the request, but I didn't get any answer!
Are the pin configurations for TSV321RAILT and TSV321RILT exactly the same?I'm having trouble finding this information in the datasheet.
I began to learn STM MCU programming. I use Arduino framework. Is It possible to get full access by using Vscode + platformIO + Arduino framework. Full access means can functioning all features of stm ic. I have stm32 blue pill development board. Pl...
Hello Everyone,I am attempting to debug code on the STM32 Blue Pill board. The project compiles successfully, but when I start a debug session, it fails with the message “Launch debugging failed,” along with additional error details shown below. I wo...
Hello,I am currently developing a presence detection system using the STHS34PF80 sensor. My goal is to detect a person at a distance of approximately 2.5 meters.I am experiencing an issue regarding stationary subjects. While the sensor successfully d...
Title edited to flag that it's a clone ST-LinkI’m trying to flash an STM32G431CB on a B-G431B-ESC1 ESC board for a reaction wheel-based attitude control system. So there’s three ESCs each. For every one, I soldered 4 wires to the J4 SWD pads (SWDIO, ...
Buenos días a todos, Me presento, soy Hugo un alumno de universidad que está preparando su TFG, acerca de la IA preventiva, para ello me gustaría hacer una demostración y es ahí donde me surgen las dudas, que ojalá me ayuden a resolverlas. Quiero ins...
Hello,I'm working on a project to increase the detection range of the STHS34PF80. During my tests with different LPF and Threshold settings, I noticed that TPRESENCE_L often drops to 0 and stops updating entirely.It feels like the internal algorithm ...
Hello,We are currently looking for a 2-terminal active (ideal) bypass diode that can be directly soldered to the ribbons inside our solar modules. Please note that the component must be able to withstand the lamination process.We previously evaluate...
