Ask questions on STM32CubeMX. Discuss code generation and configuration challenges, among other topics.
We are pleased to announce that version 6.17.0 of STM32CubeMX is available. What is new in 6.17.0: Added support for new microcontrollers across the STM32WBA, STM32H5, and STM32U3 seriesAdded support for new boards: NUCLEO-WBA25CE1, NUCLEO-H5E5ZJ, ST...
Hi,I am trying to generate code for STM32L010C6T6.using CubeMX5.5.0 & Atollic 9.0.1 IDE..After generating a code, I build it. I found errors likeselected processor does not support `cpsid i' in Thumb mode selected processor does not support `dsb 0xF'...
Attached is a CubeMX 4.26.0 project file (.IOC) with custom settings for the SDMMC1 interface (SDMMC1 hardware control ENABLED, among many other things). Yet when I generate code, for an Atollic project (or any kind of other project), and look at the...
I am on macOS 10.13.6 High Sierra. I own a NUCLEO-F446RE board.I am trying to build a simple test project with SystemWorkbench, i.e. SW4STM32.I open STM32CubeMX, I select my NUCLEO board, I select SW4STM32 as Toolchain/IDE, I press "generate code" an...
I am aware I am using a slight outdated version and so apologise if this fix has already been implemented.When selecting a Custom HID Class under the middleware tab there is no option to enable or disable the USBD_SUPPORT_USER_STRING parameter, and i...
As titleI generate USB CDC with STM32CubeMX,and try to send data by using interrupt transfer end point 0x81I try to usb Bushound to receive data, but it could not revive any data from CDC interrupt IN.Is there any things that i should be modify?Exper...
Dear ST Hello,I am using Cubmx to create an RTOS for stm32f429I discovery board.I generated the default project for this board with FreeRTOS.I have an error compilation,Middlewares/Third_Party/FreeRTOS/Source/tasks.o: In function `prvAddNewTaskToRead...
I generated SPI1 on CubeMX. Does CubeMX SPI configuration include GPIO functionalities for the SPI pins, or do we need to programme GPIO manually? I enabled SPI1 on CubeMX using STM32L433 on pins 11(SPI-CLK), 16(MISO), 17(MOSI). I am interfacing it t...
STM32CubeMX v6.1.0, H7 lib v 1.8.0is generating code where main() calls MX_USB_DEVICE_Init();, but MX_USB_DEVICE_Init does not seem to be defined anywhere.int main(void) { ... /* Initialize all configured peripherals */ MX_GPIO_Init(); ... MX...
Hello @Khouloud ZEMMELI ,STM32CubeMX 6.0.1 not allowing same text for Task Name and Entry Function.As per my understanding the text entered against property Task Name will be encapsulated in double quotes and will be assigned to variable name. The t...
