Discuss power management solutions. Ask questions and find answers on voltage configurations, short circuit protection, and programming.
Posted on February 17, 2015 at 12:55Hi All!! We are a company based inThessaloniki Greece, which focuses its activities in the sector of trafficcontrol. Our R&D department is in the design process of a power supplydevice that will be used...
Posted on February 15, 2015 at 04:41Hi, I got some information about VIPer06 from google search, it can be applied for 440 VAC input, but the drain current is only 350mA, my requirement is greater than 2A, in ST web site, if I choose VIPer100A-E, ...
Posted on January 13, 2015 at 20:37I am having trouble driving a peltier device with the VNH5019. The channel config. in the scope pictures is as follows:1. Vin to H-bridge2. PWM logic in3. A leg out4. B leg outGoodDrive.bmp shows what's supposed to...
Posted on February 11, 2015 at 22:42I'm trying to use an X-NUCLEO-IHM01A1, but without an STM32 board. That is, I need to wire up each of the necessary pins individually, sending the proper signals via another microcontroller.For now, I just need to...
Posted on February 04, 2015 at 09:23Hi, would be possible to share a Vbatt file to perform a load dump simulation? (Vbatt nominal:12V). Thank you. Best regards, Marty Beaker #twistersim
Posted on January 18, 2015 at 11:44Hello,We are currently evaluating EVL6699-90WADP. Is there anywhere to get the Gerber files for the EVM?Matt
Posted on January 07, 2015 at 18:41Hello, Is there a best practice for EMC filtering on the L6235? In applications with other drivers we've added RC filters on the outputs between switches and motor to dampen the switching noise. Is this recommended...
Posted on January 03, 2015 at 02:50Hi,Does 3PHASELV-KIT board support a 2 pole motor with 40,000 rpm max speed? the datasheet for 3PHASELV-KIT shows it supports a 6 pole motor up to 3000 rpm, so for a 2 pole motor, I would expect it can support up t...
Posted on January 08, 2015 at 20:54There is no useful information on the ST website (none I can find in three days) that explains which PC GUIs can be used with which eval systems. Can someone explain which PC GUIs are avaliable for which Eval syste...
Posted on December 28, 2014 at 17:53Hello all1 I'm searching for VN5050 PSpice model. I saw that the Orcad library for this IC is available. How can I obtain a PSpice model? #vn5050
We’re moving the ST Community to a new platform to give you a better and more reliable community experience.
