Power management

Hello, we are using the STEVAL-ISB68WA to learn more about how to apply the STWLC68. Unfortunately, it does not seem to be working out-of-the-box as stated in the user manual.

We have tried three different Qi compatible charging pads which are successfully charging other devices.We are seeing the ping from the charging pad's transmitter but are not seeing the reply from the STWLC68 that is required to establish the power t...

Hi I'm looking for the Firmware for the STEVAL-DPSTPFC1 Totem Pole PFC with inrush current limiter. But the zipped file I downloaded only has a .bin file in it. Do you provide the whole source code package? Thanks

In our scheme, L6562 was used. There are no notes on her work. We decided to install the L6562A without changing the design. However, we have problems and after a while our devices fail. Is it possible to just replace the L6562 with the L6562A without cha

USB-C PD Controller STUSB1702 : SRC / DFP Role

Hello,I would like to use an stusb1702 on my custom board as source / DFP docking. I found git project for an stusb1602 and nothing for stusb1702. Can someone confirme to me that I2C Register Map is the same between both. Indeed I am not able to writ...

Is there any item can pin to pin replace code TS331ICT

I want to use STEF01 as efuse in my circuit. I have a fairly big capacitance at the output of this chip, which is around 4mF.

 I am planning to turn on the chip really slow, around 0.5s, so the current going through the internal MOSFET is going to be small. The input voltage is about 24V, i do not plan to use external MOSFET. so the issue is, I do not see SOA of the intern...

Is there a spice model available for the PWD13F60?

I would like to know the recommend PCB Layout for LD57100. (Pad size ,Resist size, Metal mask size)