Discuss hardware and software design challenges, including NOR flash storage, OTA updates, component ID, and thermal management.
Posted on March 23, 2013 at 23:11I'm playing around with external interupts from a button and the code base is essentially what was used in the discovery board. It seems as though the documentation suggests that external iunterrupts from the ports c...
Posted on March 21, 2013 at 20:53I cannot find a link to download the touch sensing library for the STM8L15x microcontroller. Where is the software in the new site ? #touch-stm8l15x
Posted on March 17, 2013 at 15:21Dear Colleagues, My initialisation file is attached below. I have configuren 4 timer for PWM and UART0 for communication. The timers are working fine, but the UART does not give me any interrupt when 8 (or even mor...
Posted on September 09, 2009 at 19:29Timer1 External Clk source mode2
Posted on March 09, 2013 at 00:43Hi, It is written we can find a online help file ''stm8s_fwlib_um.chm'' in the document UM0834 for the STM8S-DISCOVERY, in chapter 3.1.2.Where can I get it exactly????Thanks in advanceS.K #help-file
Posted on March 09, 2013 at 09:28Hi , I'm using STM8L151C4 in my design. I have interfaced this with I2C EEPROM M24512FDW (ST make). Plz refer attachment for the schematic. I had pulled the enable lines of the EEPROM ( E0, E1, E2) to high (3.3V) & ...
Posted on March 07, 2013 at 13:01 Hi All, I am using the STM8L152 to generate a PWM, with it's duty cycle depending on current flowing through a relay coil. I have achieved this using the ETR input, with the following code: ...
Posted on October 08, 2012 at 20:33I did not expect for that !
Posted on March 04, 2013 at 21:14Was using STVD successfully for a couple of projects on two different machines. One machine is still working fine. I cannot create a new project targeting either the Raisonance Tool Chain, or any other tool chain ...
Posted on June 12, 2007 at 12:16Soft reset during sector erase on internal flash
We’re moving the ST Community to a new platform to give you a better and more reliable community experience.
