Discuss hardware and software design challenges, including NOR flash storage, OTA updates, component ID, and thermal management.
Posted on June 17, 2016 at 15:40Hi all,I am working on STM8 bootloader configuration.Can anyone please provide a link for STM8 visual programmer software and how to use it for unlocking the unlocking the STM8 bootloader.Thanks in advanceAmit Kumaram...
Posted on July 02, 2016 at 13:16dear all:how can i reading flash and eeprom of st10f168q and erifying and then write to other newone st10f168.please if possible send me files or link tools and schematic for connecting to pc and st10f168.best regards...
Posted on July 02, 2016 at 13:15dear all:how can i reading flash and eeprom of st10f168q and erifying and then write to other newone st10f168.please if possible send me files or link tools and schematic for connecting to pc and st10f168.best regards...
Posted on July 01, 2016 at 13:17my fCPU is16MHz. In order to get 500K baudrate, I have programmed as follows: CAN_SynJumpWidth = CAN_SynJumpWidth_1TimeQuantum; CAN_BitSeg1 = CAN_BitSeg1_8TimeQuantum ; CAN_BitSeg2 = CAN_BitSeg2_7TimeQuantum; CAN_P...
Posted on June 13, 2016 at 09:18Dear All,I use <<STM8S_TouchSensing_Lib_V2.5.0_setup.exe>> to build one testing system of STM8S RC Touchsensing. it has four ''buttons'' and four LEDs. for every ''button'', it can works well for touching. once the h...
Posted on June 29, 2016 at 04:57Hi All I am new to stm32 nucleo board, the pins on morpho connector are I/O pin? Or they are used to connect to expansion board only?thanksfrom Peter
Posted on May 02, 2013 at 11:25Dear All, I am trying to measure the frequency (and duty cycle) of a 1 kHz to 2 kHz signal which is connected to PD4 using TIM1 capture capability. As far as I can see from the documentation PD4 is connected to TIM1.IC...
Posted on June 23, 2016 at 22:08Is there any free RTOS for ST7? Philipp
Posted on June 23, 2016 at 21:29I just compiled a quick availability list of RTOSes that are relevant to the STM8 (by having an STM8 or ST7 port, or just being one of the most important RTOSes out there). The list features availability aspects: Lice...
Posted on May 30, 2016 at 09:06Hi All, First, I am completely new to ST Micro devices. My experience is with microchip/atmel. It is my hope that by joining & posting on this forum, I can learn and grow with this procc family. I recently rece...
We’re moving the ST Community to a new platform to give you a better and more reliable community experience.
