Ask questions and find answers on ST MEMS sensors, such as the LSM6DSV and the LSM6DSL. Learn how to use the SensorTile.Box, and STEVAL kits.
HiIm using samsung galaxy j5 accelerometer for a research work about automobile acceleration and deceleration. As you know samsung electronics uses stm mems sensors on its smartphones. In case of galaxy j5, based on some papers, the accelerometer nam...
Greetings,On the custom board I'm working on, the HTS is powered off (electrically) when unused. The rail used to power the HTS can't remain on because it also powers other components which must be powered off to meet the consumption target.I noticed...
If the LPS25HTR module is not the right device, would you something more appropriate?
Smart Things for the IoT, Smart Driving, and Smart Home, City & Industry.The last Virtual 2020 ST Developers Conference is based on these topics, and many related sensors applications and demos have been presented, such as for example the interesting...
Currently I am using LIS2DW12 in my project with ODR set to 1600Hz in High performance mode. Reading the datasheet I found that the maximum bandwidth for this ODR ir 400Hz. I want to understand why tye maximum bandwidth for this setting is 400Hz and ...
We are developing a new product with the LIS2DE12 and are planning to use Ultrasonic welding during assembly of the ABS plastic enclosure. The welding machine will hammer on the enclosure with a frequency of 20KHz, with an amplitude of 20umeter and a...
In application note said that "The accelerometer sampling chain is represented by a cascade of three main blocks: an ADC converter, a digital low-pass filter (LPF1) and the composite group of digital filters". I want to know what type of filter is LP...
I'm attempting to use LIS2DE12 at it's maximum ODR (Nominally 5376 Hz) to accurately measure the vibration frequency of a piece of equipment.I have discovered that the ODR of my sample accelerometers is not the same. The first one that I tested was a...
I put this in MEMS and Sensors but maybe it should go in Automotive, but after browsing for a component, I'm not finding any sensor ICs for automotive TPMS systems in the category of pressure transducers/transmitters used for these systems. Is there...
I want to calculate angle from gyro and for this issue formula is this: angle=angle+gyro*dtFor dt; since my code is too long, instead of usind sample rate directly , ı want to calculate time that code consume's gyro reading part to gyro reading part....
