I am using STEVAL_STLKV101 to develop BLE functionality. Please let me know whether in Cube MX 1. High Speed Clock to be Disabled . If other setting it is getting clashed with BLUE_RST. enclosing the image .

[Snara.21]

# PHO is connected to BLUE_RST which is supposed to be the HSE clock in Cube MX. How to bypass this ?

1. If we configure PD2 and PC12 In schematics it is mentioned as USART pin but in MX the same pin is configured for UART5. If I configure and go to BLE -1 Parameter setting UART5 is not shown . How to we enable the BLE Beacon application option.
2. There is no key switch what we should do in the MX configuration for the button selection

The schematic says USART Configuration