Ask questions and find answers on connectivity ICs, focusing on protocols and I2C challenges on STM32 Nucleo boards and BlueNRG products.
Posted on April 12, 2016 at 10:56Hello, I want to embedd the BlueNRG-MS firmware in my main application controller flash. Therefore I have to convert the .img firmware file to a binary file. Is there a converter program for this kind of work?
Posted on May 23, 2016 at 11:15I'm working with the X-NUCLEO-IDB05A1 with the BlueNRG-MS on it.I follow the quick start guide (Version 1.4) and on the ''Evaluate BlueNRG using a GUI'' section when starting the BlueNRG GUI (Version 1.9) it asked me t...
Posted on May 13, 2016 at 13:00Hello sir,I am working on STP04CM05 Driver for msp430. I am struggle with how set the colour and brightness. Send me sample code of it. or possible to send the proper detail of it.waiting for reply... #spi
Posted on May 10, 2016 at 21:22I just purchased a couple modules (SPBT2632C1A) for Blue Tooth 3.I'm trying to familiarize myself with them before they are arrive and there seems to be a lack of information out there.The DS provides some basic info, ...
Posted on January 30, 2016 at 00:07Hi, We are encountering the following issue: after some time (minutes), the module is not visible by Android phones anymore, but is still visible by other iPhones or BlueNRG-MS devices. The time after this happens ...
Posted on April 29, 2016 at 18:12Does anybody know how to isolate 2 network with the same program (multicast mode) but I want to find just one thing that I could change to separate the network.like network#1 6 devices, each devices have a specific ...
Posted on April 22, 2016 at 17:06Hi Gerry, I need to update the firmware of my devices (not the firmware of the module) over the air. Can you give an example which commands the firmware update with at+s.fwupdate uses and how the firmware update work...
Posted on March 10, 2016 at 11:33Hello everybody, I have trouble with upload data to external memory with SPWF01SA. which software are you used for create fs image? (*.img).
Posted on April 22, 2016 at 16:07In some conditions i have problems with BlueNRG based device - it fails, don`t enter to low consumption mode, drains the battery. In FW Release Notes i saw a lot of errors and i need some workaround to guarantee reli...
Posted on March 28, 2016 at 09:43Hi, We're using Nucleo-L4 with X-CUBE-BLE1 Expansion SW with lower mode enabled. The 32L4 HSE XTAL input is driven by external oscillator. We would like to disable the external clock during low power mode of 32L4 and...
We’re moving the ST Community to a new platform to give you a better and more reliable community experience.
