Ask questions and find answers on connectivity ICs, focusing on protocols and I2C challenges on STM32 Nucleo boards and BlueNRG products.
Hello All,My Android App is connected with a custom printer that uses the BLUENRG-M2SA module in order to receive data.The connection is stable and data are transfered correctly.The app talks over GATT: it writes the status/clear/write/print enquirie...
Hi ST community,I am using STM32H723ZGT6 as the host MCU with the ST67W611M1 Wi-Fi + BLE module.Software details:Firmware flashed on ST67: T01 binarySTM32 firmware package: X-CUBE-ST67W61(1.1.0)Application selected: BLE P2PEnabled parameters:Wi-Fi SA...
If I have only 5V input. what to do with the FB pin?
Hello,I am testing FP-SNS-BLEMESH1 on two STEVAL-MKBOXPROA boards.Setup:Board: STEVAL-MKBOXPRO AFirmware: BlueNRG-Mesh Sensor Demo v2.1.3Library: BlueNRG-Mesh Library v01.14.000Bearer: PB-ADVOne board configured as Embedded ProvisionerOne board confi...
Does the ST67W611M1 (-B version) with PCB antenna have a built in rf switch? We want to programmatically or via pins switch between the PCB antenna and an external antenna.
Module / setup- Module: ST87M01-1301- Host: STM32-class MCU over UART, 115200 8N1, no flow control- Carrier: 1NCE NB-IoT (auto-PDP on CID 5)- AT manual reference: v3.1, 2025-10-06Current sleep-related configuration16:34:39.720 -> === AT readbacks ===...
Hi,here is a post for wireless community (Sub-1Ghz solutions) to answer many frequently asked questions and good practices using ST S2-LP transceiver.please find attached document to get additional information on this perfect Radio chipset.ThanksPhil...
Hi, i experimented the following configuration STEVAL-MKBOXPRO with BLEMLC code available within FP-SNS-STBOX1 package. For my specific application, i want to increase the BLE transmit power of the BlueNRG-LP chip of the MKBOXPRO. So i modified the c...
Hello,I am an engineering student working on my senior graduation project using the STEVAL-WBC2TX50 evaluation board. I need the STSW-WBC2STUDIO (or the updated WPSTUDIO) GUI to configure the board, but all official links on the ST website return a 4...
(official project, W61 firmware updated, full setup completed) **[BUG/HELP] X-CUBE-ST67W61 V1.2.0 — sem_if_ready not received on NUCLEO-N657X0-Q after complete setup**---**Hardware:**- NUCLEO-N657X0-Q (MB1940)- X-NUCLEO-67W61M1 (MB2230)- JP1 and JP2 ...
We’re moving the ST Community to a new platform to give you a better and more reliable community experience.
