Ask questions and find answers on STM32 microprocessors and dedicated embedded software solutions, such as Yocto SDK, Qt, and OP-TEE.
HelloI am building Linux on a custom board using the STM32MP255F-AK.The following error occurs during kernel boot:[ 15.371350] stm32-dwmac 482c0000.eth1: Failed to reset the DMA [ 15.386447] stm32-dwmac 482c0000.eth1 end0: stmmac_hw_setup: DMA engine...
Hi, I'm having trouble building the core-image-weston image. I'm using Ubuntu 22 and VMware Workstation.config in local.conf:MACHINE = "stm32mp1"DISTRO ?= "poky"EXTRA_IMAGE_FEATURES ?= "debug-tweaks"USER_CLASSES ?= "buildstats"PATCHRESOLVE = "noop"BB...
Hi, I'm getting an error when uploading an image downloaded from the STM32 OpenSTlinux website via STM32Programmer. I'm uploading the STM32MP157F-DK2 version. The OTG cable is connected, and the DIP switches are also in the correct positions. what co...
Hi,I'm experiencing a fetching error with m4projects-stm32mp1 while building st-image-weston.First i had problem while fetching from:git://github.com/STMicroelectronics/STM32CubeMP1.git;protocol=https;branch=masterSince github doesn't support git: pr...
I get this issue in the booting process of Linux. Then nothing else happens, except outputs from Optee. F/TC:? 0 pta_scmi_ocall:207 Posting MSG message on channel 0 root '/dev/disk/by-partuuid/e91c4e10-16e6-4c0e-bd0e-77becf4a3582' doesn't exist or F/...
Hi ST Team,I am currently working with the STM32MP257F-EV1 based custom carrier board and experiencing an issue during the flashing process(boot mode is eMMC).Initially, the board works fine and flashing completes successfully. Over the time, the fla...
This might be my misunderstanding of how OVERRIDES work, but I'm building with the recently-released "wrynose_v26.02.18" branch of meta-st-stm32mp and, for the purpose of debugging, I wanted to set:ST_OPTEE_CORE_DEBUG = "y"so I did that in my local.c...
Hi~ My board gets stuck at the kernel stage during boot. I've referred to numerous related posts but failed to resolve the issue.The boot file versions I use are OP-TEE 4.0, U-Boot 2023.10 and Linux 6.6.116.The official device tree I referenced is st...
I wonder why this is happening after U-boot has booten up?It seems that something is NULL. D/TC:? 0 tee_ta_close_session:484 Destroy session Error: eth1@482c0000 address not set. D/TC:? 0 tee_ta_init_session_with_context:562 Re-open trusted service ...
Hello,I would like to ask about the current status of Bare-Metal support for the Cortex-A35 core on the STM32MP2x platform (STM32MP257F-DK).While searching the ST Community, I came across the following discussion related to this topic:https://communi...
